新闻

New Width Gauge for Cold Rolling Mill

2020-02-21

The Stereoscopic Width Gauge DigiScan XD500, designed for installation in cold rolling mills and processing lines, is a new compact gauge for measuring the width and centerline of strip or plate. 

The stereoscopic arrangement permits high on-line accuracy despite material hop, tilt, lateral movement, and thickness variation.

The gauge has an integrated Web server and the connection to the gauge with any Web browser, from a PC or a tablet, gives an access to gauge's measurement data, configuration parameters, diagnostic.

Communication is possible through Ethernet with Modbus TCP and OPC UA protocols, or optional industrial network protocol Profibus-DP or Profinet.

The width gauge is delivered calibrated in our factory. The installation’s position is not critical as the stereoscopic cameras will compensate for any variation in the distance between the strip and the gauge.

With a smaller and lighter sealed aluminium housing, the XD500 is easy to install, maintain and dismount.

 

More information via this link: https://www.deltasensor.eu/en/Products/Measurement-Gauges/DigiScan-XD500